Sizing starting from 300 mm to 2000 mm square are available in deferent models of recess Chamber, membrane and plate & frame filter presses, fully s.S. Cladded filter press for Special gmp requirement, zero leakage type filter presses etc…
Different segments of automations are also available as per user & application requirements.
Like : conventional filter press, partial – auto & fully – auto and can customized as per Application requirement.
| Size : | From 300 x 300 mm size up to 1500 x 1500 mm size |
| Type : | Chamber Recess Type, Plate and Frame Type, CGR type |
| Model : | Center Feed, Corner Feed, Top Center Feed. |
| Cake Thickness : | Thickness : 25 mm, 32 mm, 35 mm, 40 mm, 50 mm |
| Type of Discharge : | Open delivery, Closed Delivery, Top corner Washing, Closed Counter Current Washing, Open cum Closed Delivery |
Filter presses normally run in a “batch” manner. They are filled with slurry ahead of finishing a filtering cycle and processing a batch of solid filtered material, called the filter “cake”. The solid is extracted, the press refilled with slurry and the filtering cycle repeated. A filter press uses improved pressure to bump up the rate of filtration and manufacture a final filter cake with a moderate water content.
A filter press be made up a series of filter chambers carry square filter plates aided in a frame. The liquid firm mixture is drained into the filter press, which is devised of a number of recessed filter plates constructing chambers. The plates are carried in an assembled steel frame and are hold on to closed by a force applied from a hydraulic ram scaled in the frame work at the end of the machine.
All filter plate is protected by a filter cloth that preserve the solid particles, but accepting the liquid to pass through and vent through the ports in the filter plate. Additionally to the filter plate filtration medium, the fill out cake increases removal of thin particles in the slurry. The particles engaged gradually build up on the outside of the filter media and thereafter a period of time finally form a solid cake.
The Filtered aerosol coming across the filter press outlets, called the filtrate, will be much filtered.
The filtrate can be drained away for safe disposal, or it can be remained in a water tank for reprocessed use. At the end of filtration, the solid filter cake can be take out. The complete filtration procedure is often directed by electronics to produce it automatic or semi-automatic.
As the cake formation the pressure inside the filter press the force rises as the filtrate has to proceed through the already moderately formed cake to exit the chamber. It becomes increasingly more grinding to continue forcing as the press is unable to receive more solids. Again the feed pump is caressing infrequently and the filtrate flow from the filter press has significantly reduced or completely finished.
At a pre-determined filtration time or pressure being achieved the cycle is ended and the fully formed filter cake is released.
The Plate And Frame Filter Press is a product from Yo-tana that has a wide variety of uses in mineral, chemical, and environment processing applications. The original design of the plate and frame filter press has been maintained by us but it has also been modernized to meet the needs and requirements of industries in the 21st century. Our product has the reputation of lowering the cost of operation in industries and businesses.
As mentioned before, the plate and frame filter press that we offer at Yo-tana has kept much of the original design work though lots of modernisation has been done. The design is a solid plate that is covered by a filter cloth and there is a hollow frame located between each of the plates.
The slurry gets pumped in the corner holes, which may be just one or multiple in number. After this happens, the slurry gets pumped into each of the frames before it gets filtered by the cloth that has been placed. Next, the filtered solution is sent travelling on the solid plate after which it reaches one of the corner holes that is not used for feeding the slurry into the machine. Next, the cleaned solution is discharged in the tank, the process, or the drain, according to the customer’s requirement. This ensures that it will ultimately work in the way the user demands.
At Yo-tana, we work with our customers every step of the way to bring products that suit their unique industrial needs. At every point, we are happy to ensure that our products meet the needs and exceed the expectations of our customers. The filter press plates our product comes with are built with solid and high-quality raw materials that are specifically chosen to suit the requirements.
At Yo-tana, you get the benefit of choosing a company that is a known name in the solid-liquid filtration industry. Our handiwork is apparent in every industry that uses the filtration process.
We are the conventional filter press exporters of choice for a high number of businesses and we continue to be a force to reckon with. With our filter press plates, you can be assured of great quality every step of the way and a desire to customize according to the needs of the customer. We understand that every business is different and it is our goal to make sure that we become the No. 1 conventional filter press suppliers.
Industries that require polishing applications greatly appreciate Yo-tana’s products. We will be able to meet your industry’s requirements. Get in touch with us and see the difference we make to your bottom line.
